Android Device Connection Guide:

1.      Turn on the projector and select "Wired Screen".

2.      Scan the QR code on the screen or click download at the bottom of this guide to download and install the "HCCast" app.

3.      Open the "HCCast" app and connect the device to the projector using a USB data cable.

4.      Grant the permissions requested by the "HCCast" app.

5.      Disconnect the USB cable and reconnect.

*Only applicable to the YG300, M200S, M4, M5, M60 projectors

Download: HCCast 3.3.0.apk

iOS Device Connection Guide (No APP):

1.      Turn on the projector and select input source "Wired Screen".

2.      Connect the iOS device to the projector using a USB data cable.

*Only applicable to the YG300, M200S, M4, M5, M60 projectors

***Please make sure there is at least 1 meter away from the screen***

Non-Electronic Focus: Adjust the Focus Lever/Ring near the lens.

Electronic Focus: Adjust the focus by pressing the Focus Buttons “F-” / “F+” on the remote.